Maintenance – Vivotek PZ7121 User Manual
Page 75
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 75
Maintenance
This chapter explains how to restore the Network Camera to factory default, upgrade firmware
version, etc�
Reboot
This feature allows you to reboot the Network Camera, which takes about one minute to complete� When
completed, the live video page will be displayed in your browser� The following message will show during
the rebooting process�
If the connection fails after rebooting, manually enter the IP address of the Network Camera in the
address field to resume the connection.
Restore
This feature allows you to restore the Network Camera to factory default�
Network Type: Select this option to retain the Network Type settings (please refer to Network Type on
page 32)�
Daylight Saving Time: Select this option to retain the Daylight Saving Time settings (please refer to
System on page 24)�
Custom language: Select this option to retain the Custom language settings�
If none of the options is selected, all settings will be restored to factory default�
The following message is displayed during the restoring process�
Calibrate
This feature re-calibrate the home position to the default center to recover the tolerance caused by some
external forces� Please note that there is no confirming message box after clicking on Calibrate, the
Network Camera will calibrate immediately�