Vivotek PZ7121 - Manual (Page 114)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
114 - User's Manual
PARAMETER VALUE DESCRIPTION
addpos
40 characters>
Add one preset location to preset list.
channel <0~(n-1)> channel of video source
delpos
40 characters>
Delete preset location from preset list.
return Redirect to the page after the parameter is
assigned. The can be a full URL path or relative
path according to the current path. If you omit this parameter, it
will redirect to an empty page.
IP filtering
Note: This request requires administrator access privilege
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/ipfilter.cgi?
method=&[start=&end=][&index=<value>]
[&return=]
PARAMETER VALUE DESCRIPTION
addallow Add a set of allow IP address range to server. Start and end parameters must
be specified. If the index parameter is specified, it will try to add starting from
index position.
adddeny Add a set of deny IP address range to server. Start and end parameters must
be specified. If the index parameter is specified, it will try to add starting from
index position.
deleteallow Remove a set of allow IP address range from server. If start and end
parameters are specified, it will try to remove the matched IP address. If index
is specified, it will try to remove the address from given index position. [start,
end] parameters have higher priority then the [index] parameter.
Method
deletedeny Remove a set of deny IP address range from server. If start and end
parameters are specified, it will try to remove the matched IP address. If index
is specified, it will try to remove the address from given index position. [start,
end] parameters have higher priority then the [index] parameter.
start The start IP address to add or to delete.