System log – Vivotek PZ7121 User Manual
Page 73
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 73
System log
Advanced mode
This section explains how to configure the Network Camera to send system log to the remote
server as a backup�
Remote Log
You can configure the Network Camera to send the system log file to a remote server as a log backup.
Before utilizing this feature, it is suggested to install a log-recording tool to receive system log messages
from the Network Camera� For example, a tool -- Kiwi Syslog Daemon� Visit
http://www�kiwisyslog�com/
kiwi-syslog-daemon-overview/
�
Follow the steps below to set up the remote log:
1� In the IP address text box, enter the IP address of the remote server�
2� In the port text box, enter the port number of the remote server�
3� When completed, select
Enable remote log and click Save to take effect�
Current Log
This column displays the system’s log in chronological order� The system log is stored in the Network
Camera’s buffer area and will be overwritten when reaching a certain amount�