Visioneer XP220 - Manual (Page 151)

144 V ISIONEER S TROBE XP 220 S CANNER U SER ’ S G UIDE
6. To recalibrate, click the Calibrate button.
The Calibration window opens.
7. To clean the scanner, click the Clean button.
The Cleaning window opens.
Note: The Device Configuration Properties window is also available
from the Windows Control Panel under Scanners and Cameras.
For Windows XP: Right-click on the Visioneer Strobe XP220 icon,
select Properties, then select Device Settings.
For Windows 2000: Select the Visioneer Strobe XP 220 icon, click
on the Properties button, then select Device Settings.