Maintenance and security, Replacing the projection lamp, Rrectly. see replacing the projection lamp on pa – Vivitek D735VX User Manual

Page 41: Eplacing the, Rojection, Aintenance and, Ecurity

Text mode
Original mode

– 35 –

AINTENANCE AND

ECURITY

Replacing the Projection Lamp

The projection lamp should be replaced when it burns out. It should only be replaced with a certified
replacement part, which you can order from your local dealer.

Important:

a. The lamp contains a certain amount of mercury and should be disposed of according to local ordi-
nance regulations.

b. Avoid touching the glass surface of the new lamp: Doing so may shorten its operation life.

Warning:

Be sure to turn off and unplug the projector at least 30 minutes before replacing the lamp. Failure to
do so could result in a severe burn.

Note:
Safety glasses should be worn when replacing the lamp while the projector is ceiling mounted.

Loosen the two cap-
tive screws on the
lamp compartment
cover (A).