Plate and ceiling mounting plate - exploded view – Vidikron Vision 75 User Manual
Page 40
24
Vidikron Vision Model 65/Model 75 Installation/Operation Manual
Installing the Fixed CineWide
Base Plate (Cylindrical Lens)
Figure 3-9 shows the cylindrical (Rainier II/McKinley) lens base plate assembly for a
Vision 65/CineWide or Vision 75/CineWide.
Figure 3-9. Vision 65/CineWide or Vision 75/CineWide with Rainier II/McKinley
(Cylindrical) Lens Base Plate and Ceiling Mounting Plate - Exploded View
1.
Place the projector upside down on a blanket or other soft surface.
2.
Install a nylon spacer (item #3) at each mounting hole location.
3.
Line up the four mounting holes on the CineWide base plate (item #2) with those on the
bottom of the projector.
➤
Ceiling Mount
Plate (part of
Ceiling Mount
Kit)
Anamorphic Lens
Base Plate
Nylon Spacer,
5/8” diameter x
3/16” high (4x)
Screw,
Screw,
Phillips
Phillips
Pan-Head,
Pan-Head,
M6 x 1.0 x
M6 x 1.0 x
12mm (4x)
12mm (4x)
1
2
3