Vidikron 80 - Manual (Page 10)

10
Controls and Features
$PWFS-BUDIFT
Projector Chassis Cover
To Open the Projector Cover:
1. Locate the two black cover latches under the front edge.
2. Push the latches fi rmly IN toward the center of the unit. DO NOT FORCE THE TABS. It may be easier to loosen one side fi rst, then the
other.
3. When the cover latches are loosened, then the top cover will swing upward and reveal the system control panel, cable connection panel
and more.
To Close the Projector Cover:
1. To close simply reposition the cover over the latches and press fi rmly, Latches will then snap closed.
2. IMPORTANT — When fi nished working under the cover and latches have been initially secured. Move the latches OUT TOWARD THE
COVER EDGES. This securely locks the cover to the projector.