Programming – Viper 5901 User Manual

Page 48

1-W

Programming

To enter; hold the

button for 8 seconds, the remote emits one long

beep and turns the LED on, the programming main menu has been
accessed.
To exit; press and release the

button to go back and repeat to exit.

1 short and 1 long beep is emitted for each step back, the LED turns
off when programming is exited.

Sensor Adjust
The

button is used for sensor adjustment, to avoid unintended

alarm triggers, it is recommenced that an authorized Directed
dealer perform all sensor adjustments.

Remote Features menu
Press and release the

button, 2 LED ﬂashes and beeps indi-

cate the remote features menu is accessed and can be set. Press
buttons indicated below, 1beep and ﬂash turns the feature on, 2
beeps and ﬂashes turns the feature off.

Autolock feature: Press

to turn on/off.

Remote Beeps: Press

to turn on/off.

Car 2 feature: Press

to turn on/off.

Remote Learning
Press the

button,3 LED ﬂashes and beeps indicates the remote

is ready to program to the system.
Per the instruction in Remote Pair under the Main Menu section
of this guide, following step 4 of Prepare the vehicle system to
be Paired with a new remote. Press and hold the

button,

the siren emits one long chirp to conﬁrm the remote has been
learned.