Remote start error, Feature details – Viper 5901 User Manual
Page 42

Feature Details
39
© 2009 Directed Electronics. All rights reserved.
Remote Start Error
For user safety, the system must be properly configured or remote start
will not activate. Refer to the table below for the screens and parking
light flashes that will identify the configuration issue and resolution.
Flashes *
Possible Fault
Solution
5
Brake on
Release foot brake
6
Hood open
Close hood
7
After performing Remote Start
command - MTS not enabled
After performing Timer Start or
Smart Start command
Enable MTS mode
Check all Solutions
8
Toggle Switch off
Turn switch on
None
Alarm is triggered
Disarm or reset alarm
* Refers to the number of parking light flashes.