Vox E 1 - Manual (Page 53)

Tuner
Foot
Controller
MIDI/DIGITAL
Factory settings
Trouble- shooting
Spec.
Program
List
43
1. Press the UTILITY button (3.4) to make the button light.
2. Press the 1/PREV or 2/NEXT button (3.3) to make the name display (3.8) read
“EXP ***”. The parameter will change each time you press a button.
3. Use value knob 3 (2.5) or the ▲ , ▼ buttons (3.2) to specify the target.
“EXP ***” selects the expression target (i.e., the effect that will be controlled).
The parameter that will be controlled will depend on the effect you select.
HINT: If you set the PEDAL effect type to “VOX WAH” or “U-VIBE,” the expression
target will automatically be set to “EXP PDL.” In this case if you set the PEDAL
effect back to another type without performing any other operation, the target set-
ting will also automatically return to its previous setting.
NOTE: If the target effect is OFF, nothing will be controlled. In the case of the
PEDAL effect, nothing will be controlled except for “VOX WAH” or “U-VIBE.”
4. To set the minimum (MIN) value for the foot controller, press the 2/NEXT button
(3.3) to make the name display (3.8) show “EXP MIN.”
5. Use value knob 3 (2.5) or the ▲ , ▼ buttons (3.2) to specify the minimum value
of the target range.
This determines the range in which the target parameter will vary when you
operate the expression pedal. “EXP MIN” sets the lower limit, and “EXP MAX”
sets the upper limit.
When you operate the expression pedal, the target parameter will change
within the range that you specify here.
6. To set the maximum (MAX) value for the foot controller, set “EXP MAX” as
described in steps 4 and 5.
7. To set the initialization (INIT) value for the foot controller, press the 2/NEXT
button (3.3) to make the name display (3.8) show “EXP INIT.”
Expression target Type
Parameter that is
controlled
“EXP ---” Control nothing ------ ------
“EXP PDL” PEDAL effect
VOX WAH
“PEDAL” parameter of VOX
WAH
U-VIBE
“SPEED” parameter of U-
VIBE
“EXP MOD” MODULATION effect
Other than FLANGER “SPEED” parameter
FLANGER
“MANUAL” parameter
“EXP DLY” DELAY effect All types Input level to DELAY effect
“EXP REV” REVERB effect All types
Input level to REVERB
effect