Vox E 1 User Manual

Page 19

Introduction

Panel Tour

Setup

Program/

Manual

Creating

and Storing

3.5

GLOBAL Button

This is where you adjust settings for MIDI or the digital output.

Press the GLOBAL button to make it light, and then use the 1/PREV and 2/
NEXT buttons (3.3) to move through the menu items listed below.
After selecting the desired menu item, use value knob 3 or the

▲

▼

buttons to

change the value. For some menu items, you will also use the 3/

√

and 4/

buttons.

3.6

WRITE/ENTER Button

This button is used when you want to store a new program. (p.20)

3.7

TUNER/CANCEL Button

This button turns the built-in chromatic tuner on/off.

You will also use this to abort saving a program, or to cancel a GLOBAL or
UTILITY operation.

3.8

Name Display

This displays program names, effect names, and parameter names.

3.9

Valve Icon

This indicates the number and type of power valves (vacuum tubes used in the
power stage) in the original amp that is being modeled.

3.10 Value Display

This indicates the value of the parameter.
If the displayed parameter value matches the value before you edited it (i.e.,
the value that is stored in the program), the ORIG (original value) icon will
appear.
If you have modified (edited) any parameter of the program, the EDIT icon will
appear.

NR SENS:

Noise reduction

(p.19)

********:

Program name

(p.19)

EXP :

Expression target

(p.42)

EXP MIN:

Expression target range (minimum value)

(p.42)