Adjusting the speaker balance, Enabling or disabling the built-in speakers, Selecting the digital output mode – Vizio E321MV User Manual
Page 32
24
6
E321MV
Adjusting the Speaker Balance
The built-in speakers can be adjusted to distribute the sound between the left and
right speakers.
To adjust the speaker balance:
1. Press the
OK button on the remote. The on-screen menu is displayed.
2. Use the
Arrow buttons to highlight Audio and press OK.
3. Use the
Arrow buttons to highlight Balance and press OK.
4. Use the
Arrow buttons to adjust the speaker balance:
• To increase the loudness of the right speaker, increase the balance
setting.
• To increase the loudness of the left speaker, decrease the balance
setting.
Enabling or Disabling the Built-In Speakers
Using this menu option, you can turn the built-in speakers on or off. This is often
used when the TV is connected to a home audio system.
To enable or disable the built-in speakers:
1. Press the
OK button on the remote. The on-screen menu is displayed.
2. Use the
Arrow buttons to highlight Audio and press OK.
3. Use the
Arrow buttons to highlight Speakers and press OK.
4. Press the
Right/Left Arrow buttons to select On or Off and press EXIT.
Selecting the Digital Output Mode
Using this menu option, you can force the TV to downsample unsupported audio
formats to PCM audio. You may want to use this option if you have an older audio
receiver connected to the TV.
If you are unfamiliar with audio formats, or your TV is not connected
to an audio receiver, VIZIO recommends you set this option to
Auto.
This option only affects audio output from the optical port.
To select the digital output mode:
1. Press the
OK button on the remote.
The on-screen menu is displayed.
2. Use the
Arrow buttons to highlight
Audio and press OK.
3. Use the
Arrow buttons to highlight
Digital Audio Out and press
OK.
4. Use the
Arrow buttons to highlight
Auto or Force PCM and press
OK.
5. Press
EXIT.