Visioneer STROBE 450 - Manual (Page 11)

6 V ISIONEER S TROBE XP 450 S CANNER U SER ’ S G UIDE
S
TEP
1: A
SSEMBLE THE
S
CANNER
1. Remove all shipping tape from the top and bottom of the scanner.
2. Carefully remove the protective foam from the ADF cover release, then
press the release and open the Automatic Document Feeder cover.
3. Remove any foam particles that may have gotten inside the document
feeder, and close the cover.
4. Align the slots on the input tray with the ridges on the scanner and
slide it down until it snaps into place.