Mountng bracket nstallaton, Getting started, Mounting bracket installation – VTech CS5111-3 User Manual
Page 7

www.vtechphones.com
4
Getting started
Mounting bracket installation
Your telephone base comes wth the mountng
bracket nstalled, ready for desktop use. You may
also mount your telephone onto a standard telephone
wall plate.
Wall mounting bracket installation:
To prepare the telephone base for wall mountng,
you wll need to remove the bracket f t s currently
attached for desktop use. Press on the tabs located
on the legs of the bracket to loosen, then lft the
bracket up and away from the telephone base.
Frst, nsert the lower porton tabs of the mountng
bracket nto the lower grooves n the telephone
base, then snap the upper porton tabs of the
mountng bracket nto place.
Mount the telephone base on the wall by postonng
it so the mounting studs will fit into the holes on the
telephone base and mountng bracket. Slde the
telephone base down on the mountng studs untl
t locks nto place.
To remove the bracket, press both upper porton
tabs firmly inward and pull the bracket downward
untl t releases from the grooves.
1.
2.
3.
AC 7.5V
Mountng bracket n wall
mount orentaton
upper grooves
upper porton tabs
lower
porton
tabs
Mountng bracket
lower groove