Low runtime alert, Cabin temperature – Viper 5301 User Manual

Page 36

Use one of the below methods to exit Smart Start mode:

•

Perform the same steps you followed to activate Smart Start mode

•

Turn the ignition On

•

Press the brake pedal

The parking lights flash 5 times slowly to confirm the remote has exited Smart

Start mode.

➢

Low runtime alert

During remote start a message is sent three minutes before and then again at

one minute before the engine turns off. The 2- way remote plays tones as an

alert to reset the runtime if desired.

➢

Cabin temperature

Using the Responder LE you have the ability to check the temperature inside the

vehicle.

Press the

button one-time, and then press and hold until the remote beeps,

and then release. The LEDs light up indicating the temperature range of the

vehicle.

95˚F and above

76˚F to 95˚F

56˚F to 75˚F

32˚F to 55˚F

32˚F and below

AUX