Valet mode – Viper 5301 User Manual

Page 28

UnLocking without the honk (Silent Unlock)

Press the button on the remote one-time, and then press the

3
4
5
6

A U

button. The

vehicle unlocks without the confirmation honk. The parking lights flash two-

times. The 2- way remote flashes the

3
4
5
6

A U

LED to confirm unlocking. If no unlock

confirmation is received, the 2- way remote emits the out-of-range signal.

When unlocking in valet mode with the 2- way remote, the remote generates

two error tones and the

3
4
5
6

A U

and LEDs light up.

➢

Valet mode

You can prevent your system from automatically activating the Failsafe® Starter

Kill. When the system is in Valet mode, the feature is disabled. The doors

do not automatically lock. This is useful when washing or having the vehicle

serviced.

To enter or exit valet mode with the Control button:

1. Turn the ignition key on and then off.

2. At anytime during the next 10 seconds, press and

release the Control button on the Control Center.

The LED turns on solid when you enter Valet®

Mode, and turns off when you exit Valet Mode.

To enter or exit Valet mode with the remote control:

Press

two times, and then to set the system in Valet Mode. Repeat the

process to take the system out of Valet Mode.

The Control Center LED turns on solid when in Valet Mode and turns off when

exiting Valet Mode.