Volvo 940 - Manual (Page 72)

1993 Volvo 940
WARNING! Do not adjust the seat while driving. The seat should be adjusted so that the brake pedal
can be depressed fully. In addition, position the seat as far rearward as comfort and control allow. The
seat rails on the floor must not be obstructed in any way when the seat is moved.
The starting (ignition) key (certain models) must be in at least position I before the seat can be operated.
Movement of the driver's seat can be STOPPED at any time by pressing any button on the seat's control
panel.
WARNING! The driver's seat is operable with the ignition
OFF.
Therefore, children should never be left unattended in the car.
Programming the memory
Three seat positions can be programmed. To program a seat position:
1. Adjust the seat to the desired position.
2. Depress the MEM button.
3. Press button 1 to program the current position of the seat.
Buttons 2 and 3 can be programmed in the same way for two additional seat positions. To move the seat
to a programmed position, depress button 1, 2 or 3 until the seat stops. If the button is released before the
seat has the reached the programmed position, it will stop as a safety precaution.
file:///K|/ownersdocs/1993/1993_940/93940_2_1.html (5 of 8)12/30/2006 9:44:24 AM