Volvo 940 - Manual (Page 165)

1993 Volvo 940
WARNING!
When the car is driven immediately after being washed, apply the brake several times in order to
remove any moisture from the brake linings.
Engine cleaning agents should not be used when the engine is warm. This constitutes a fire risk.
NOTE: When washing the car, remember to remove dirt from the drain holes in the doors and
sills.
pg. 7:7 Automatic car washing, Polishing and waxing, Chromed parts
Automatic washing - simple and quick
An automatic wash is a simple and quick way to clean your car. Keeping the underbody clean is most
important, especially in the winter. Some automatic washers do not have the facilities for washing the
underbody. Before driving into an automatic wash, make sure that the side view mirrors, auxiliary
lamps, etc., are secure, otherwise there is risk of the machine dislodging them. You should also lower
the antenna. We recommended that you do not wash your car in an automatic wash during the first six
months (because the paint will not have hardened sufficiently).
Polishing and waxing
Normally, polishing is not required during the first year after delivery, however, waxing may be
beneficial.
Before applying polish or wax the car must be washed and dried. Tar spots can be removed with
kerosene or tar remover. Difficult spots may require a fine rubbing compound.
After polishing use liquid or paste wax.
Several commercially-available products contain both polish and wax. Waxing alone does not substitute
for polishing of a dull surface.
A wide range of polymer-based car waxes can be purchased today.
The waxes are easy to use and produce a long-lasting, high-gloss finish that protects the bodywork
against oxidation, road dirt and fading.
Chromed parts
file:///K|/ownersdocs/1993/1993_940/93940_7_1.html (8 of 10)12/30/2006 9:44:34 AM