Volvo 940 - Manual (Page 146)

1993 Volvo 940
pg. 6:5 Replacing bulbs
NOTE!
The method for replacement of bulbs in the various lighting units is shown on the following pages.
Make sure when installing bulbs, that the guide pin on the socket fits into its corresponding recess.
When installing Halogen bulbs, do not touch the glass with your fingers. The reason for this is that
grease, oil or any other impurities can be carbonized onto the bulb and damage the reflector.
Use bulbs of correct type and voltage. Failure to do so could cause the bulb failure warning light to
activate.
Headlamps
1 Pull the connector out.
2 Loosen the ring by turning it counterclockwise.
3 Pull the bulb straight out.
4 Replace the bulb and reinstall the unit in the reverse order.
Bulb Power US Bulb No.
________________________
Headlamp (45/65) HB1/9004
file:///K|/ownersdocs/1993/1993_940/93940_6_5.html (1 of 12)12/30/2006 9:44:33 AM