VTech CS5123 - Manual (Page 8)

www.vtechphones.com 4
Getting started
Mounting bracket installation
Your telephone base comes wth the mountng bracket nstalled, ready for desktop
use. You may also mount your telephone onto a standard telephone wall plate.
Wall mounting bracket installation:
To prepare the telephone base for wall mountng, you wll need to remove the
bracket f t s currently attached for desktop use. Press on the tabs located on
the legs of the bracket to loosen, then lft the bracket up and away from the
telephone base.
Frst, nsert the lower porton tabs of the mountng bracket nto the lower
grooves n the telephone base, then snap the upper porton tabs of the mountng
bracket nto place.
Mount the telephone base on the wall by postonng t so the mountng studs
will fit into the holes on the telephone base and mounting bracket. Slide the
telephone base down on the mountng studs untl t locks nto place.
To remove the bracket, press both upper portion tabs firmly inward and pull
the bracket downward untl t releases from the grooves.
1.
2.
3.
Mountng bracket n wall mount orentaton
upper grooves
upper porton tabs
lower porton
tabs
lower groove
Mountng bracket
mddle grooves