VTech DECT6.0 DS6151 - Manual (Page 21)

17
Telephone base settings
Key tone
You can turn the key tone feature on or off.
To change the settings:
Press the MENU softkey when the telephone base is
not in use.
Press
/
CID
or /
DIR
to select Settings, then press
the SELECT softkey.
Press /
CID
or /
DIR
to select Key tone, then press
the SELECT softkey.
Press /
CID
or /
DIR
to choose On or Off, then press
the SET softkey to save or press CANCEL to exit to
the previous menu.
1.
2.
3.
4.
Set date/time
The answering system announces the day and time
of each message prior to playing it. If you subscribe to
caller ID service from your telephone service provider,
the day, month and time are set automatically with each
incoming call. However, the year must be correct so that
the day of t he week can be calculated from the caller ID
information. Before using the answering system, set the
date and time as follows.
To adjust the date and time:
Press the MENU softkey when the telephone base is
not in use.
Press
/
CID
or /
DIR
to select Settings, then press
the SELECT softkey.
Press /
CID
or /
DIR
to select Set date/time, then
press the SELECT softkey.
Press the dialing keys ( 0-9) to enter a two-digit
number or press /
CID
or /
DIR
until the screen
displays the correct value. Press the SET softkey
to advance.
Repeat step 4 until the date and time are set.
1.
2.
3.
4.
5.
If the date and time are not set, the system announces, “Time and day not
set,” before each message plays.
KEY TONE
On
Off
SET
Clear voicemail
Key tone
Set date/time
SELECT
Key tone
Set date/time
Home area code
SELECT
SET
SET DATE
12/31/09
MM/DD/YY
SET TIME
03:45 AM
SET
SELECT
Intercom
Ringers
Settings
SELECT
Intercom
Ringers
Settings