VIEWSONIC VS12675-1M - Manual (Page 34)

Using TV Features
ViewSonic 28 VT2645 / VT3245 / VT3745
English
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
Step 2: Press FAV1, FAV2, or FAV3 on the remote control and hold this button for more
than 3 seconds.
The current channel is saved as the favorite channel.
How to Select the Favorite Channel
Press FAV1, FAV2, or FAV3 on the remote control and release it, then the TV will be
change to the pre-stored channel number.
Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the Power button on the front of the panel.
Changing Channels
1. Using Channel Buttons
Press CH button to change channels, and the TV changes chan-
nels in sequence. You will see all channels that have been memorized.
Channels erased or not memorized will not be shown.
2. Using Number Buttons
Using the remote control buttons 0-9, select channel for NTSC/ATSC/CATV.
To select 1, 2 or 3-digt channel number (e.g., Channel 110)
Press 1 1 0.
To select 4-digit channel number (e.g. Channel 23-1)
Press 2 3 - 1.
Adjusting the Volume
Press VOL +/- to adjust volume.
To turn off the volume, press MUTE.
To restore volume, press MUTE again, or press VOL +/- directly.
Viewing the Displayed Information
To display the current information of the LCD TV:
Press INFO, and the current state will be displayed on the screen. (It
shows all or some of the information about Input, Channel, Resolu-
tion, Audio Type, etc., depending on what input source it is in)
FAV1 FAV2 FAV3
INFO.
MUTE
INFO.
MUTE
SOURCE EXIT
INFO.
MUTE
SOURCE EXIT