VIEWSONIC N1750w - Manual (Page 15)

13
V-CHIP SETUP
Select V-Chip on OSD then enter 4 digits of pin number.
Initial pin number is “0000”.
If you enter an incorrect pin number “Incorrect” message will be displayed.
It is the parental control function (V-chip). It is used to block program viewing based on the ratings
by the broadcaster. The default setting is to allow all programs to be viewed. Viewing can be
blocked by the type of program and by the categories chosen be blocked. It is also possible to
block all program viewing for a time period.
A. There are two item could be defined. One is TV Guidelines another one is Movie
Guidelines.
B. Setting up TV Guidelines
Use Up/Down arrow buttons to move around the matrix and press Right arrow button
to change the value form “U” to “B” or ”B” to ”U”
U: Unblock
B: Block