Vuzix IWEAR AV310 - Manual (Page 9)

AccuTilt ® Viewer Adjustment
AccuTilt viewer adjustment is a Vuzix technology that allows
you to adjust the angle of the display housing 15 degrees to
ensure optimum angle and screen clarity.
To adjust the viewing angle, grasp the viewer and tilt it up or
down.
Nose Bridge Adjust
Your video eyewear is equipped with an
adjustable nose bridge that provides a
broad range of adjustment.
To adjust the nose bridge, grasp a nose
bridge pad between your thumb and
forefinger and bend the arm to an appropriate position. Repeat with the other
nose pad and then make minor adjustments until a comfortable position has
been achieved.
Please note the nose bridge adjustment is designed for occasional adjustment of
a single user. It is not designed for repeated bending or extreme bend angles.
These actions may weaken the bridge support wires resulting in damage.
Prescription eyeglass wearers can adjust the nose bridge to wear their video
over and in front of their glasses.
A second style of nose bridge pad is
provided with your Vuzix AV310
Widescreen. Use whichever you find most
comfortable. Gently pull the prong on the
rear of the pad out from the wire frame to
remove a pad and the prong back in to
replace a pad. A small amount of moisture
may ease the friction of removing and inserting these prongs.
Head Strap
A head strap is provided to assist in
securing your AV310 Widescreen over
eyeglasses, when resting your head on a
pillow or when performing activities that
might cause it to shift positions.
Secure the head strap to the hooks on the
end of the stems and pull the slider where
the tether leads join to provide a
comfortable yet secure fit.
English – 9 of 12