Vizio XMF1000 User Manual

Page 14

5. Remove the bar, the leveler, and the unattached bracket (

part A)

from the wall.

Allow the attached bracket to swing down.

Using the power drill and the 1/2” concrete drill bit, drill into the
3 pencil marks as shown. Drill each hole about 2 1/2” deep.

6. Remove

3 anchors from the pouch labeled ANCHOR.

Push the anchors into the holes you just drilled. Ensure the
anchors are completely inserted and flush with the wall.

Pencil Marks

1/2”