VIEWSONIC VS12280-1A - Manual (Page 33)

Using the TV Features
ViewSonic 28 N3290w/N4290p/ N4790p
TIME
1. Press the MENU button to display the OSD
main menu.
2. Press ▲ or▼ to select the “TIME” menu.
3. Press ► to enter the sub-menu, and use ▲▼ to
select the settings.
4. Press ◄► to adjust the settings.
5. Press OK or ► to confirm.
6. Press MENU to return to the previous menu or
press Exit to exit the menu.
z
Clock: If you have DTV, the Clock will
consistent with the input source.
Only in the ATV mode, user can set the
clock by pressing ▲▼. (hour/minute/AM or
PM)
z
Off Time: Set the time for TV off in the range of
24 hours.
−
Repeat: Select On or Off to activate the
function and adjust the Hour or Minute. When
the On is selected, the TV will turn off
automatically very day.
−
Hour
−
Minute
z
On Time: Set the time for TV on in the range of
24 hours.
−
Activate: Select On or Off to activate the
function.
−
Hour
−
Minute
−
Volume: Adjust the volume when TV on.
−
Mode: Select the input source of TV or DTV.
z
Sleep Timer: Let you select the amount of time
before your TV turns off automatically. You
could select Off, 10min, 20min, 30min,
60min, 90min, 120min, or 240min.
z
Auto Sleep: Select On or Off. If TV doesn’t
receive the input source, select On and TV will
turn off automatically.
z
Time Zone: Select time based on GMT.