Verizon GT701C User Manual
Page 27
24
DSL Modem User Manual
25
Chapter 4 Configuring Advanced Settings
The “
WAN IP
Address” screen appears.
WAN IP
Address allows manual set up of the
IP
address of the Modem. To do this:
☞
Note: Some
DSL
providers use
PPP
o
E
to establish communication
with an end user. Other types of broadband Internet connections
may use either
DHCP
or static
IP
address. If unsure which connec-
tion is present, check with Verizon before continuing.
1. Select “
DHCP
” or “
PPP
o
E
,” depending on the type of connection the
ISP
uses.
If
PPP
Auto Connect is being used, click in the appropriate check box.
2. If
PPPoE
was selected in step 1, enter the user name and password in the
appropriate text boxes.
3. Select the
IP
type. If “Single Static
IP
Address
”
was selected, enter the
IP
address in the “Single Static
IP
” text box. If “Multiple Static
IP
Addresses” was
selected, enter the designated gateway
IP
address and subnet mask address in
the “Gateway Address” and “Subnet Mask” text boxes respectively.