VIEWSONIC VS13772-1M - Manual (Page 40)

28
Other Information
ENGLISH
ViewSonic VT3210LED/VT4210LED
Channel tuning problems
• The channel may have been erased from the channel memory by the
Programming channels automatically feature. Add the channel to
the channel memory (page 32).
• The channel may be blocked by the LOCK feature. Unblock the
channel (Channel Option on page 32).
• If you are unable to tune digital channels, check the antenna
configuration (Input Configuration on page 32). If you are still
unable to tune digital channels, clear all channels from the channel
list and reprogram channels into the channel memory (page 32). If
you are still unable to tune digital channels, use the Reset Factory
Defaults procedure (page 32). Also see “TV stops responding to
controls” and “Other Information” (page 35).
Closed caption problems
• If the program or video you selected is not closedcaptioned, no
captions will display (page 29).
• If text is not available, a black rectangle may appear. If this happens,
turn off the closed caption feature (page 29).
• A closed-caption signal may not display correctly in the following
situations: a) when a videotape has been dubbed; b) when the signal
reception is weak; or c) when the signal reception is nonstandard
(page 29).
Rating blocking (V-Chip) problems
• If you forget your PIN code: While the PIN code entering screen is
displayed, enter the common PIN code "3660" to unlock (page 30).
No HDMI-CEC operation
• The HDMI-CEC feature is available for the HDMI-CEC compatible
devices.
• Make sure the HDMI cables with the HDMI Logo ( )
are used.
• When the connected HDMI-CEC device does not work correctly
after you have changed settings of the device, turn off your TV and
unplug the power cord, then plug and turn on again.
• If several devices are connected, HDMI-CEC feature may not
operate properly.
• Read the instruction manual furnished with the connected HDMI-
CEC device.
HDMI problems
For HDMI cables
• Make sure to use cables with the HDMI Logo ( )
Media Player problems
• Make sure that devices are connected correctly.
• Incorrect behavior may occur with a USB HUB connection.
• Photo files that was processed and edited by using the PC’s
application software may not be able to be viewed.
• The TV may select one format automatically and play it when
contents that support two or more formats are played.
• Confirm contents of the USB storage device are formats that
correspond with this TV (page 33).