VIEWSONIC VS13772-1M - Manual (Page 22)

10
Getting Started
ENGLISH
ViewSonic VT3210LED/VT4210LED
Personal Computer
Use the LED TV as the monitor of your computer.
The picture below shows the connection for PC. The LED TV can also be connected to PC with DVI or
HDMI output.
Connect to an HDMI
compatible PC with
the HDMI cable
VGA 15 Pin cable
Audio cable
Rear of TV
• Connect the VGA Signal In jack to the PC using a 15-pin cable.
• Connect the VGA Audio In jack to the PC using an audio cable.
Digital audio system
The TV’s DIGITAL AUDIO OUT terminal outputs a *Dolby ® Digital or 2-channel down-mixed PCM
(pulse-code modulation) signal for use with an external Dolby ® Digital decoder or other external audio
system with optical audio input.
Dolby Digital decoder or
other digital audio system
DIGITAL
AUDIO
OUT
Optical audio cable
Rear of TV
• You will need an optical audio cable (Use an optical audio cable that has the larger “ TosLink” connector
and not the smaller “mini-optical” connector.)
• To control the audio ( Optical Output Format on page 28)
Note:
• Some audio systems may not be compatible with Dolby Digital bitstream signals. Older audio systems that are not compatible
with standard optical out signals may not work properly, creating a high noise level that may damage speakers or headphones.
THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY.
• The DIGITAL AUDIO OUT terminal may not output some digital audio sources because of copy restrictions.