Step 2 configure your pc, For windows 2000 or xp – VIEWSONIC WR100 User Manual

Page 14

Text mode
Original mode

ViewSonic Wireless Router

Step 2 Configure your PC

Make sure that your computer is set to DHCP (Dynamic Host
Configuration Protocol) to obtain an IP address automatically as
follows:

For Windows 2000 or XP

Click the Windows

Start button > Control Panel > Network

and Internet Connections > Local Area Connection. The
Local Area Connection Status screen appears as shown on
the right.

From the General tab (usually appears selected by default),
click Properties. The Local Area Connection Properties
screen appears in the next step.