VIEWSONIC WR100 - Manual (Page 12)

ViewSonic Wireless Router 8
Step 1 Connect the wireless
router.
1 Make sure you have all the setup information from your Internet
Service Provider (ISP).
2 Make sure that all network hardware is turned off, including the
router, computer(s), and cable or DSL model.
3 Connect one end of an Ethernet cable to one of the LAN ports
as shown on the right (labeled 1, 2, 3, or 4 on the back of the
router). Plug the other end of the cable to the Ethernet port on
your computer. To connect an additional computer or network
devices to the router, repeat this step.
Optional: Connect another Ethernet cable from your cable or
DSL model to the WAN port on the back of the router.
Ethernet cable
to PC
Modem
(DSL or cable)
Additional
computer
Ethernet cable to modem