VTech VT 4121 - Manual (Page 30)

30
IMPORTANT: You must subscribe to
Caller ID service pro-
vided by your local
telephone company
on each line you wish
to receive call informa-
tion.
1. Caller ID Buttons
There are five (5) buttons used to ac-
cess Caller ID functions:
CID
•
To switch between multiple caller ID
screens during 2 or more ringing
calls.
• To move backward through the caller
ID list.
• To move forward through the caller
ID list.
ERASE
•
To erase a call from the caller ID list.
DIAL
•
To dial a number from the caller ID
list.
2. Programming the Area Code
Default: empty
When you receive a local call from a
person with your same home area code,
the telephone will not store the area
code. This feature will enable you to
redial the caller in the future.
2.1 To Program the Area Code
1. Press PROGRAM.
2. Press VOLUME until the display
shows:
3. Press MUTE (ENTER).
4. Dial the area code.
5. Press MUTE (ENTER).
2.2 To Erase the Programmed Area
Code
1. Press PROGRAM.
2. Press VOLUME until the display
shows:
3. Press MUTE (ENTER).
4. Press ERASE. The display will
show:
5. Press ERASE again. The area code
is deleted.
3. Receiving a Call
You will need to subscribe to the Caller
ID service from your telephone com-
pany to receiver Caller ID information.
When a call is received, the display will
show the name and number of the
caller, and the date and time the call is
received. Some telephone companies
send both the name and number of the
CALLER ID OPERATION