Clock setting, General, Audio modes (bass/treble/balance/fader) – Panasonic CQ-RG133W User Manual
Page 4: Initial time, Time reset, Power, Volume, Mute, Loudness, Bass
E
N
G
L
I
S
H
CQ-RG133W
7
CQ-RG133W
6
C
D
-C
CQ-RG133W
DI
SP
TRACK
TUNE
LO
UD
MONO
MUTE
DISC
SCAN
REPEAT
RANDOM
1
2
3
4
6
APM
BA
N
D
PW
R
VOL
/ P
US
H
SE
L
5
D
IS
P
TRACK
TUNE
E
N
G
L
I
S
H
3
Clock Setting
Audio Modes
(Bass/Treble/Balance/Fader)
The 24-hour system is used for the clock.
q
Push [SEL] to select the audio mode.
Volume
Bass
Treble
Balance
Fader
[
k
k TUNE], [l
l TUNE] (Hours, minutes)
w
Turn [VOL] clockwise or counterclockwise to
change each level.
Hours
w
Press and hold [DISP] (display) for more than 2
seconds.
Bass:
Adjustable range: –12 to +12 dB (by 2 dB step)
Treble:
Adjustable range: –12 to +12 dB (by 2 dB step)
Balance:
Adjustable range:
1 to 15 (by 1 step)
Balance center
(default)
R (right speaker) or L (left speaker)
Fader:
Adjustable range: 1 to 15
(by 1 step)
Fader center
(default)
F (front speaker) or R (rear speaker)
Initial Time
q
Press [DISP] (display).
(Hours blink.)
e
Press [
k
k TUNE] or [l
l TUNE].
(Hours set.)
Minutes
r
Press [DISP] (display).
(Minutes blink.)
t
Press [
k
k TUNE] or [l
l TUNE].
(Minutes set.)
y
Press [DISP] (display).
Note: Press and hold [
k
k TUNE] or [l
l TUNE] to
change numbers rapidly.
Time Reset
Press and hold [DISP] (display) for more than
2 seconds to activate the time setting mode to reset
the time.
Then, repeat steps e to y.
(End.)
(Clock display)
Note: If no operation takes place for more than 5 seconds
in audio mode (2 seconds in volume mode), the display
returns to the regular mode.
push
“AdJ” is displayed when the clock is not adjusted.
C
D
-C
CQ-RG133W
DI
SP
TRACK
TUNE
LO
UD
MONO
MUTE
DISC
SCAN
REPEAT
RANDOM
1
2
3
4
6
APM
BA
N
D
PW
R
VOL
/ P
US
H
SE
L
5
PW
R
DI
SP
MUTE
General
Volume level (0 to 39)
Power
Turn the key in the ignition until the accessory
indicator lights.
Power on: Press [PWR].
Power off: Press [PWR] again.
ACC
ON
Volume
Turn the knob clockwise to increase volume,
and counterclockwise to decrease volume.
Mute
Press [MUTE] to mute the sound completely.
Loudness
Press and hold for more than 2 seconds. [MUTE]
(LOUD) to enhance bass and treble tones at low or
medium volume.
Loudness indicator
Press and hold for more than 2 seconds [MUTE]
(LOUD) again to cancel.
Up
Down
Press
[MUTE] again to cancel.
MUTE indicator
[DISP] (display)
E
N
G
L
I
S
H
2
default: 0 dB
default: 0 dB