9 enlarging one part of the screen, Enlarging one part of the screen, 9. viewing an enlarged area of the display – Vidikron VP-6000a User Manual
Page 59: Pre l iminar y
Vidikron PlasmaView Owner’s Operating Manual
49
PRE
L
IMINAR
Y
4.9
Enlarging One Part of the
Screen
The PlasmaView allows you to zoom in on a portion of the displayed image. To use this
feature, press the MAGNIFY button repeatedly to select one of four zoom levels
(Normal Size, 1.5x, 2x or 3x); see Figure 4-9. When using the zoom feature, a small subscreen
appears in the upper-right corner of the display.
Use the directional buttons (
/
/
/
) to select a magnified image area to display. As you
do this, a green plus sign (+) appears in the subscreen to indicate the center of the enlarged
area.
Figure 4-9. Viewing an Enlarged Area of the Display
1. You cannot change the aspect ratio while using the MAGNIFY function.
2. The MAGNIFY function is cancelled if the input signal changes, or if you
switch inputs or select PIP mode.
Magnification Level 1 (Normal Size)
Magnification Level 3 (2x)
Zoom-Area subscreen
+
Note