Vanguard Managed Solutions 650 - Manual (Page 38)

2-8 Installing 650 Series Hardware
Removing the Top Cover and Front Panel
Removing the Top Cover and Front Panel
Before You Begin Power down and disconnect the 650 Series before removing the top cover, front
panel, or any components.
Cover and Front
Panel Removal Figure 2-5 shows you how to remove the top cover and front panel.
Figure 2-5. Opening the 650 Series
Insert a screwdriver at a
45
°
angle on one of the six
release hinges and push
downward.
1
2
3 Release three hinges on each side.
Remove the front panel by snapping panel
from tabs.
Open this panel by pulling the panel
forward on its hinge.
4
650
STAT
US
TEST
ISDN-D
POTS1
PWR
POTS
2
Repeat for all six hinges.