VIEWSONIC VS13784 - Manual (Page 19)

ViewSonic 14 DPF8-CAM
Problem Cause Solution
Power indicator is
not lit.
Power is off or power
indicator is broken.
Check whether the power supply
(AC adapter) is well connected and
the socket works normally.
The order of image files
is not what I wanted.
The order of files is sorted
by file name.Numbers
have higher priority than
alphabets.
Rename the files.
Note: Since there are many brands of memory cards, please test the compatibility on the spot
when you purchase the memory cards. This digital photo frame cannot support pirate cards. If the
memory card is correctly inserted, and the start-up interface is displayed but the photo frame can
not read the card, please turn off and restart the photo frame, or format the card and re-copy files.
Appendix
Troubleshooting
Using remote control
Button Description
1
Press to enter the Standby
mode. Press and hold down
for 2 seconds to power on.
2 Directional buttons
3 Shutter button
4 Enter/Play/Pause
5 Exit button
6 Menu button
7 Up/Right
8 Down/Left
9 Delete button
10 Copy button
11 Enter/Confirm/Slideshow
1
3
2
7
6
5 10
9
8
11
4
Before using the
remote control, be
sure to remove the
insulator.