VTech i 5803 - Manual (Page 40)

40
Advanced Operations
Mute Function
During an active call pressing either the MUTE softkey on
the Handset or the
MUTE
button on the Base (when in
Speakerphone mode), will disable the microphone. Press
MUTE
again to return to normal two-way conversation.
Hold Function
From the Handset:
• Press the HOLD softkey to place a call on hold. To return
to the call, press the
ON
(or
SPEAKERPHONE
) key.
NOTE:
The Handset will display
CALL ON HOLD
when a call
is placed on hold. If you have new calls in call log, CALL ON
HOLD
will display alternately. An
H
will be displayed to remind
you a call is on hold. If a call remains on Hold for 5 minutes,
your
i 5857
Handset will ring to remind you the call is being
held. The phone will display
Call On Hold Ring Back!
You
have 30 seconds to return to the call before it is dropped.
From the Base:
•
During an active call, press the
HOLD
softkey to place a
call on hold. The SPEAKERPHONE LED will flash to indicate
a call is on hold.
• To return to the call, press SPEAKERPHONE.
NOTE: Base will display CALL ON HOLD when a call is
placed on hold. If a call remains on hold for 5 minutes, your
i 5857 Base will ring to remind you the call is being held. The
phone will display
CALL ON HOLD RING BACK!
You have
30 seconds to return to the call before it is dropped.
Flash Function
You can use your
i 5857
with services such as Call Waiting.
Simply press the ON/FLASH key on the Handset or the
FLASH key on the Base (when in speakerphone mode) to
flash the line.
NATURAL - No frequency
enhancement (Your Handset is
preset to this selection)
.
The Handset will graphically display the four modes.
NOTE
: The Sound Select feature cannot be used when
in Speakerphone or Headset mode.
1 1
MUTE HOLD
Natural Audio
12:30PM
1 2
OK
ON OFF
1 2 1 2
MUTE HOLD 12:30PM
Handset and Base Operation
1 2
OK
ON OFF
1 2 1 2
MUTE HOLD 12:30PM
OFF
HOLD MUTE XFER