available codec types
separated by
commas)
0/7
Available codec list.
uart_httptunnel
0/7
Indicate whether to support HTTP tunnel for
UART transfer.
transmission_mod
e
Tx,
Rx,
Both
0/7
Indicate transmission mode of the machine: TX
= server, Rx = receiver box, Both = DVR.
network_wire
0/7
Indicate whether to support Ethernet.
network_wireless
0/7
Indicate whether to support wireless.
Group: event_i<0~2>
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
name
string[40]
6/6
Identification of this entry.
enable
0, 1
6/6
Enable or disable this event.
priority
0, 1, 2
6/6
Indicate the priority of this event:
“0” = low priority
“1” = normal priority
“2” = high priority
delay
1~999
6/6
Delay in seconds before detecting the next event.
trigger
boot,
di,
motion,
seq
6/6
Indicate the trigger condition:
“boot” = System boot
“di”= Digital input
“motion” = Video motion detection
“seq” = Periodic condition
di
6/6
Indicate which DI detects.
This field is required when trigger condition is “di”.
One bit represents one digital input. The LSB
indicates DI 0.
