Viper Model 3002 User Manual

Page 9

system maintenance

This system needs no specific maintenance beyond 2-way

remote control battery replacement. The 2-way remote is

by a pair of 3V CR2016 batteries.

Low Battery Notification

If the battery is low (and this feature is programmed On) the 2-

way remote will emit 2 long beeps 5-seconds after a transmission

is completed. The 2 long beeps will repeat every 25 seconds up

to 3 times (or until a 2-way remote button is pressed).

Battery Replacement

Gently pull the end of the battery door away from the top of the

remote control then slide the door up to expose the battery and

remove the expired battery. Place the new battery into the

remote control observing the correct polarity. When power is

returned the remote control will light all icons and generate

melodies (representing all beeper tones).

your warranty

Your warranty registration must be returned and the bar code

serial number must not be removed. If the warranty registration

is not returned, you do not have a warranty. It is also necessary

to keep your proof of purchase, which reflects that the product

was installed by an authorized dealer. Make sure that you receive

the warranty registration from your dealer.

➜