Vertex Standard PS1000 - Manual (Page 29)

Page 29 Phantom PS1000
(Time) (Longitude)
(No GPS Signal)
(Latitude)
10.13 NAVIGATION INDICATION
The transceiver has the ability to display the time and your vessel position (LAT/
LON), when connected to a GPS receiver.
1. Press the [NAV] key momentarily, display “time,” “latitude,” and “longitude”
informations alternately every
two seconds. If the GPS re-
ceiver is not receiving a fix, the
display will be shown “
NO POS ”
notation in the LCD.
2. To hide the navigation information, press the [NAV] key again.
You may display the COG (Course Over Ground) data in the
LCD instead of your vessel position (LAT/LON) by the Radio
Setup Mode, refer to section “12.4 CHANGING GPS INFOR-
MATION TO VESSEL POSITION OR COG.”