Viking F131D - Manual (Page 8)

For Immediate Cook
1. Press BAKE TEMP once. A single tone will sound, the bake L.E.D. indicator
light in the upper left corner and the bar segments “---” of the display will
light prompting the setting of the bake temperature using the UP or DOWN
buttons.
2. The temperature will default to 350°F when either UP or DOWN button is
pressed. Tapping the buttons will increase or decrease the temperature in 5-
degree increments. The temperature will increase or decrease in 25-degree
increments when the UP or DOWN button is pressed and held down. The
temperature can be set from a low of 170°F to a high of 550°F. When the
desired temperature has been reached, a tone will sound indicating the
oven has preheated.
3. The oven set temperature will be displayed during the baking process. The
oven function selector must be turned to either the BAKE or CONVECTION
BAKE position.
4. The bake function may be terminated by pressing the cancel key once.
Setting Timed Cook
The timed cook feature automatically ends a cooking function. This feature
does not automatically start a cooking function.
1. Press COOK TIME once. A single tone will sound and 0:00 will appear on
the L.E.D. display.
2. The UP and DOWN buttons are used to set the timer. UP increases time;
DOWN decreases time. Tapping UP or DOWN button will increase or
decrease the time in 1-minute increments. When the UP or DOWN button is
held down, time will increase or decrease in 5-minute increments until the
next hour is reached, then will continue to increase or decrease in hour
increments.
3. Release the button when the appropriate time has been reached.
14 15
Electronic Timing Center
The Electronic Timing Center is used to program and control all timing functions.
There are five modes of operation.
Setting the Minute/Hour Timer
The Minute/Hour timer is designed for accurate timing and is ideal for baking
delicate items such as biscuits, cookies, and popovers and for precise broiling.
To set the Minute/Hour timer:
1. Press TIMER once to access the time of day mode. A single tone will sound
and 0:00 will appear on the L.E.D. display.
2. The UP and DOWN buttons to set the time . The UP button increases time;
the DOWN button decreases time. Tapping UP or DOWN will increase or
decrease the time in 1-minute increments. When the UP or DOWN button
is held down, time will increase or decrease in 5-minute increments until the
next hour is reached, then will continue to increase or decrease in hour
increments.
3. Release the button when the appropriate time has been reached.
4. To cancel the timer, press and hold the TIMER button for three seconds.
The TIMER mode will lockout changes and begin to count down if buttons are
not pressed for 5 seconds. Pressing TIMER once will allow the timer set time to
be changed during the countdown process. The timer can be set from a
minimum time of 1 minute to a maximum of 12 hours 0 minutes. When the timer
counts down to 1-minute, a single tone will sound indicating the timer will time
out in 1-minute. When the timer counts down to 0:00, three tones will sound
every 12 seconds until the timer is canceled by pressing the timer for three
seconds or until ten minutes has elapsed.
Clocks and Timers
VGSO166