Viking F131D - Manual (Page 7)

Setting the Automatic Start Time Bake Program
The Bake Time and Start Time modes of the Timer can be used to automatically
turn the oven on and off at a preselected time. The Automatic Time Bake
Program is ideal for foods with no danger of spoilage during the time the oven
is left off.
To set the Automatic Time Bake program
1. Program the START TIME by pressing the Start Time button and turning the
Set Knob until the desired Start Time is displayed. This is the time-of-day
you want the food to begin cooking.
2. Program the required baking time by pressing the Bake Time button. The
words SET and COOK appear in the upper right corner of the digital
display. Turn the SET knob until the desired baking time is displayed in
hours and minutes. The word SET will disappear and the word DELAY will
remain in the display indicating that the Bake Time program has been set.
3. Set the Oven Function Selector to the BAKE or CONVECTION BAKE
position, depending upon the type of baking being used.
4. Set the Temperature Control Knob to the desired temperature.
NOTE: When the specified start time is reached, the oven will automatically turn
on. The oven will bake for the programmed amount of time at the selected
temperature.
At one minute from the end of the specified bake program, the oven timer will
beep once. At the end of the specified bake program, the oven will automatically
turn off and the timer will sound a series of three beeps. This will continue until
the “start time” button is pressed. The display will then return to displaying the
time. Setting the remaining duration time to :00 will also cancel the automatic
bake program.
12 13
Setting the Bake Time Program
The Bake Time program is used for controlled timing of baked or roasted foods.
At the end of the timed cycle, the oven automatically turns off. Times in the Bake
Hours mode are displayed in hours and minutes, with a setting from 1 minute to
11 hours 59 minutes, increasing in 1 minute increments.
To set the Bake Time program
1. Set the Oven Function Selector to the BAKE or CONVECTION BAKE
position, depending upon the type of baking being used.
2. Set the temperature Control knob to the desired temperature and allow for
preheating.
3. Press and release the Bake Time button. The Timer will display :00 with the
words SET and COOK in the upper right corner of the digital display.
4. Turn the SET Knob until the desired baking time is displayed in hours and
minutes. The word COOK will remain in the display indicating that the Bake
Time program has been set.
The Timer will automatically compute a stop time and enter it into the timer
memory. The alarm will sound three beeps followed by two beeps every 10
seconds until the Bake Time button is pressed. The duration time can be
changed anytime during the cooking program by following steps 4 and 5.
Setting the remaining duration time to :00 cancels the Bake Time program. To
return the Timer to the present time-of-day, press the CLOCK button. A small
clock will appear in the upper right corner indicating a Bake Time program has
been set. The Timer will go back to the Bake Time automatically after a few
seconds.