VIPowER USB 2.0 - Manual (Page 6)

VP-6228(T) USER MANUAL 6
2. Hardware Installation
2-1 Analog Audio Connector(JP1)
Bulid-in connector (JP1) has two channels,right(“R”) and left (“L”)
audio outputs, and allows you to direct audio output from your CD/
DVD-ROM Drive to your sound device.
2-2 Jumper Settings
2-2.1 Jumper Settings for assembling with MobileRack
Jumper JP6, located on the rear PCB panel of the VP-6228(T), is
used to set running the VP-6228(T) external enclosure. The
producer setting is JP6 pins 1-2 ON.
JP6 1-2 :ON -->VP-6228(T) RUN
(Producer setting)
1
2
3
GND L R GND
JP1