VIPowER USB 2.0 - Manual (Page 17)

VP-6228(T) USER MANUAL 17
2-4 Connect the USB 2.0, 5.25” External Enclosure VP-6228(T)
to Your Computer
Computer system requirements
Hardware
Notebook or desktop computer with support for USB or USB 2.0.
Operating System
Windows 98SE/Me/2000/XP, and Mac OS 9.0 or above.
Proceed the following steps to connect to Your Computer
Step1:
Boot-up your computer. Make sure the USB/USB 2.0 host adapter
and driver are installed in your computer.
Step2:
Connect one USB connector end of the USB cable into the USB
Port of your USB 2.0, 5.25” External Enclosure VP-6228(T).
Step3:
Connect the Power Adapter Power Cord to the +5V/+12V Power
Adapter. Then, plug one end of power cord into an AC power
outlet, and the other end to the power inlet of your USB 2.0, 5.25”
External Enclosure VP-6228(T).
Step4:
Power ON your USB 2.0, 5.25” External Enclosure VP-6228(T).
Step5:
Proceed to the next “Driver Installation” section and follow the
instructions for your operating system after plugging the USB
connector end of the USB cable into a USB port on your computer.
Note:
This device will auto-detect the speed of your USB port and
adjust between USB 1.0 and USB 2.0 speed once the driver
is installed.