VIPowER USB 2.0 - Manual (Page 23)

VP-6228(T) USER MANUAL 23
4. Using The USB 2.0, 5.25” External Enclosure VP-6228(T)
After the first time installation, you can connect or disconnect the
USB 2.0, 5.25” External Enclosure VP-6228(T) without powering off
the computer. Please follow the steps below when using the
VP-6228(T).
4-1 Connect the USB 2.0, 5.25” External Enclosure VP-6228(T)
to Computer
Step1:
Plug the first USB port connector of the USB cable into the USB
port of your USB 2.0, 5.25” External Enclosure VP-6228(T).
Step2:
Plug the second USB port connector of the USB cable into an USB
port on your computer.
Step3:
Plug the power adapter power cord to the power inlet of your
USB2.0, 5.25” External Enclosure VP-6228(T). Turn the power of
the VP-6228(T) ON.
Step4:
USB 2.0, 5.25” External Enclosure VP-6228(T) is ready for use
immediately.
4-2 Disconnect the USB 2.0, 5.25” External Enclosure
VP-6228(T) from Computer
4-2.1 Windows 98:
Step1:
Double click the green Unplug or Eject hardware icon in system
tray and click the drive that you want to remove and click on
[STOP].
Step2:
When the system prompts ‘Confirm device to be stopped’, click
[OK]. When the green arrow icon disappears, you may safely
unplug the USB cable from the USB port of computer.