Visioneer 9420 User Manual
Page 40
36
V
ISIONEER
O
NE
T
OUCH
9420 USB S
CANNER
U
SER
’
S
G
UIDE
An image of the transparency then appears on the Advanced
Interface.
7. Click Preview to preview the image and adjust settings as needed.
8. See “Adjusting the Image on the Advanced Interface” on page 83
for details about adjusting settings.
9. Click Scan when you are satisfied with the image.
10. When you’re finished scanning the slides or negatives, click Done
to close the Advanced Interface.
If the Single page items check box is selected on the PaperPort
desktop, the item appears as a thumbnail on the desktop.
If the Single page items check box is not selected, thumbnails do
not appear until you indicate the scanning job is finished. If you’re
scanning multiple pages, the pages appear as PaperPort stacks.
See “The Single Page Items Check Box” on page 41.
11. On the PaperPort Scan message box, click Done.
When scanning is finished, a thumbnail of the scanned image(s)
appears on the PaperPort desktop.
Tip: For 35mm slides or negatives, set the resolution to 1200 dpi or
better. Visioneer recommends using a resolution of 2400 dpi. Refer to
“Adjusting the Resolution” on page 84 for steps to set the resolution.