Vivitar ViviCam 5024 - Manual (Page 9)

Starting Your Camera
Press and hold the Power button to turn on your camera. The LCD screen will light up indicating that your
camera is on and ready for use.
To power off your camera, press and hold the Power button again for about 3 seconds.
Camera Modes
Taking photos
Power on your camera, the default mode is Camera mode. A icon will appear on your LCD screen..
1. Hold the camera steady and compose your object as appears in the LCD screen.
2. Press the Shutter button and wait a moment for the photo to be taken.
Note: When the internal memory is full, the LCD screen will display “Memory Full! Insert a SD Memory Card
to Transfer and Take More Photos!” If you attempt to take photos or videos when the camera’s internal
memory is full, the camera will beep continuously. Please download the test images to your computer as soon
as possible or insert an SD memory card in order to take more images!
Flash
Your camera has a built in flash function which enables you to take photos when the light condition is not good.
1. Press the Up button. The icon will appear at the top of the LCD indicating that the auto flash is
turned on and ready to use.
8