Vivitar ViviCam 5024 - Manual (Page 12)

Setting Frequency
Fluorescent lighting oscillation can affect the quality of your photos. Set the camera for the correct frequency
for the country that you are in. Your camera has 2 Frequency settings, 60HZ for the U.S. and 50HZ for Europe
and Japan. The default setting is 60HZ.
To set the photo frequency:
1. Press the Menu/OK button.
2. Press the Up/Down button to select the FREQUENCY option.
3. Press the Menu/OK button again.
4. Press the Up/Down button to select either:
50 HZ
60 HZ
5. Press the Menu/OK button to confirm.
Hyperfocal distance setting
This camera is equipped with a hyperfocal distance setting. The setting is found on the left hand side of the
camera.
1. For far or mountain settings push the Micro/Normal switch down.
2. For up close settings push the Micro/Normal switch up.
The mountain setting gives you maximum depth-of-field you can possibly get with the lens you are using. You
now can have the overhead branch in focus as well as the mountains in focus - and everything in between!
11