Victorinox Swiss Army Timepiece - Manual (Page 6)

11
Français
ALARM
The alarm can only be set to operate within 12
hours of the time being set. Setting the alarm
hands on the dial subdivisions between the
numerals allows accurate setting at 15 minute
intervals. Because of the technical design of
analog timepieces, the alarm time may vary
slightly.
1. Pull the crown out to position 2.
2. Turn it away from you to set the alarm time.
3. Push the crown back to position 1 once the desired alarm time is set.
4. Pull out the alarm button (AL) to position 2 to switch on this function.
The alarm is then activated, and this is confirmed by a beep.
10
English
1 2 AL
MODE D’EMPLOI VICTORINOX SWISS ARMY
I. INFORMATIONS GÉNÉRALES
– Traitement des piles usagées 12
– Lunette tournante 13
– Etanchéité 13-14
– Correspondance mètre/bar 14
II. MODE D’EMPLOI
– Réglage de la date et de l’heure 15
– Remontage des montres manuelles ou automatiques 16
III. AUTRES FONCTIONS
– Chronographe 16-17
– Tachymètre 17
– 2nd Time Zone 18
– Dual Time 18
– Alarme 19