Uniden CXA 15698 - Manual (Page 18)

7
Base.Setup
Setting.the.Day.and.Time
To set the day and time on your phone, do the following:
) When the phone is in standby, press [clock/menu] on the base.
2) Press [set] to select TIME. The system announces "Time", the current time and
the voice guidance for setting the time.
3) Press [cid.select/ ] or [cid.select/ ] to select the day of the week, and then press [set].
4) Enter a two-digit number ( 01-12) to set hour, and then press [set].
5) Enter a two-digit number ( 00-59) to set minute, and then press [set].
6) Press [cid.select/ ] or [cid.select/ ] to choose AM or PM, and then press [set]. You will hear a confirmation
tone.
Note: If you make a mistake while entering the hour or minute, use [ ] (delete) to erase the wrong
number.and.then.enter.the.correct.number.
Selecting.a.Language.for.your.Answering.Machine.and.Base.Display
You can set the language of your base menu display and answering machine announcements to English, French, or
Spanish.
) When the phone is in standby, press [clock/menu] on the base.
2) Press [cid.select/ ] to move the pointer to select LANGUAGE, and then press
[set].
3) Press [cid.select/ ] or [cid.select/ ] to choose ENGLISH, FRANÇAIS (French), or ESPAÑOL (Spanish).
4) Press [set]. You will hear a confirmation tone.
0
Day:
Sunday
Press / or set
< >
0
Day:
Sunday
Press / or set
< >
0
Language:
English
Press / or set
< >
0
Language:
English
Press / or set
< >